Discussion:
[PATCH] Improve performance of strstr
Wilco Dijkstra
2018-09-27 15:12:56 UTC
Permalink
This patch significantly improves performance of strstr by using Sunday's
Quick-Search algorithm. Due to its simplicity it has the best average
performance of string matching algorithms on almost all inputs. It uses a
bad-character shift table to skip past mismatches.

The needle length is limited to 254 - this reduces the shift table memory
4 to 8 times, lowering preprocessing overhead and minimizing cache effects.
The limit also implies its worst-case performance is linear.

Larger needles are processed by the Two-Way algorithm. The macro AVAILABLE
has been simplified as the haystack length is always precomputed. This
results in a 2.5 times speedup for large needles, reducing the performance
drop when the Quick-Search algorithm can't be used.

The code for small needles 1-4 bytes has been simplified and now uses unsigned
char. Since the optimized code relies on 8-bit chars, we defer to the
size-optimized implementation if CHAR_BIT > 8.

The performance gain of finding a set of randomly chosen words of size 8 in
256 bytes of English text is 14 times on AArch64. For longer haystacks the
gain is well over 20 times.

The size-optimized strstr has also been rewritten from scratch to improve
performance. On the same test the performance gain is 69%.

Tested against GLIBC testsuite and passes randomized tests.

---

diff --git a/newlib/libc/string/strstr.c b/newlib/libc/string/strstr.c
index e72b4bd9125f928486f52bb3ebd199eacef7cfaf..ccbcc50a1b034d36200b9b4b17e8c4f62fcb7fc0 100644
--- a/newlib/libc/string/strstr.c
+++ b/newlib/libc/string/strstr.c
@@ -1,169 +1,154 @@
-/*
-FUNCTION
- <<strstr>>---find string segment
-
-INDEX
- strstr
-
-SYNOPSIS
- #include <string.h>
- char *strstr(const char *<[s1]>, const char *<[s2]>);
-
-DESCRIPTION
- Locates the first occurrence in the string pointed to by <[s1]> of
- the sequence of characters in the string pointed to by <[s2]>
- (excluding the terminating null character).
-
-RETURNS
- Returns a pointer to the located string segment, or a null
- pointer if the string <[s2]> is not found. If <[s2]> points to
- a string with zero length, <[s1]> is returned.
-
-PORTABILITY
-<<strstr>> is ANSI C.
-
-<<strstr>> requires no supporting OS subroutines.
-
-QUICKREF
- strstr ansi pure
-*/
+/* Optimized strstr function.
+ Copyright (c) 2018 Arm Ltd. All rights reserved.
+
+ SPDX-License-Identifier: BSD-3-Clause
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. The name of the company may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY ARM LTD ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ IN NO EVENT SHALL ARM LTD BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */

#include <string.h>
+#include <limits.h>
+
+#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__) \
+ || CHAR_BIT > 8

-#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
+/* Small and efficient strstr implementation. */
char *
-strstr (const char *searchee,
- const char *lookfor)
+strstr (const char *hs, const char *ne)
{
- /* Less code size, but quadratic performance in the worst case. */
- if (*searchee == 0)
- {
- if (*lookfor)
- return (char *) NULL;
- return (char *) searchee;
- }
+ size_t i;
+ int c = ne[0];

- while (*searchee)
+ if (c == 0)
+ return (char*)hs;
+
+ for ( ; hs[0] != '\0'; hs++)
{
- size_t i;
- i = 0;
-
- while (1)
- {
- if (lookfor[i] == 0)
- {
- return (char *) searchee;
- }
-
- if (lookfor[i] != searchee[i])
- {
- break;
- }
- i++;
- }
- searchee++;
+ if (hs[0] != c)
+ continue;
+ for (i = 1; ne[i] != 0; i++)
+ if (hs[i] != ne[i])
+ break;
+ if (ne[i] == '\0')
+ return (char*)hs;
}

- return (char *) NULL;
+ return NULL;
+}

#else /* compilation for speed */

# define RETURN_TYPE char *
-# define AVAILABLE(h, h_l, j, n_l) \
- (!memchr ((h) + (h_l), '\0', (j) + (n_l) - (h_l)) \
- && ((h_l) = (j) + (n_l)))
+/* AVAILABLE assumes haystack length has been precomputed. */
+# define AVAILABLE(h, h_l, j, n_l) ((j) <= (h_l) - (n_l))
# include "str-two-way.h"

static inline char *
-strstr2 (const char *hs, const char *ne)
+strstr2 (const unsigned char *hs, const unsigned char *ne)
{
uint32_t h1 = (ne[0] << 16) | ne[1];
uint32_t h2 = 0;
- int c = hs[0];
- while (h1 != h2 && c != 0)
- {
+ for (int c = hs[0]; h1 != h2 && c != 0; c = *++hs)
h2 = (h2 << 16) | c;
- c = *++hs;
- }
return h1 == h2 ? (char *)hs - 2 : NULL;
}

static inline char *
-strstr3 (const char *hs, const char *ne)
+strstr3 (const unsigned char *hs, const unsigned char *ne)
{
uint32_t h1 = (ne[0] << 24) | (ne[1] << 16) | (ne[2] << 8);
uint32_t h2 = 0;
- int c = hs[0];
- while (h1 != h2 && c != 0)
- {
+ for (int c = hs[0]; h1 != h2 && c != 0; c = *++hs)
h2 = (h2 | c) << 8;
- c = *++hs;
- }
return h1 == h2 ? (char *)hs - 3 : NULL;
}

static inline char *
-strstr4 (const char *hs, const char *ne)
+strstr4 (const unsigned char *hs, const unsigned char *ne)
{
uint32_t h1 = (ne[0] << 24) | (ne[1] << 16) | (ne[2] << 8) | ne[3];
uint32_t h2 = 0;
- int c = hs[0];
- while (h1 != h2 && c != 0)
- {
- h2 = (h2 << 8) | c;
- c = *++hs;
- }
+ for (int c = hs[0]; c != 0 && h1 != h2; c = *++hs)
+ h2 = (h2 << 8) | c;
return h1 == h2 ? (char *)hs - 4 : NULL;
}

+/* Extremely fast strstr algorithm with guaranteed linear-time performance.
+ Small needles up to size 4 use a dedicated linear search. Longer needles
+ up to size 254 use Sunday's Quick-Search algorithm. Due to its simplicity
+ it has the best average performance of string matching algorithms on almost
+ all inputs. It uses a bad-character shift table to skip past mismatches.
+ By limiting the needle length to 254, the shift table can be reduced to
+ 256 bytes, lowering preprocessing overhead and minimizing cache effects.
+ The limit also implies the worst-case performance is linear.
+ Even larger needles are processed by the linear-time Two-Way algorithm.
+*/
char *
-strstr (const char *searchee,
- const char *lookfor)
+strstr (const char *haystack, const char *needle)
{
- /* Larger code size, but guaranteed linear performance. */
- const char *haystack = searchee;
- const char *needle = lookfor;
- size_t needle_len; /* Length of NEEDLE. */
- size_t haystack_len; /* Known minimum length of HAYSTACK. */
- int ok = 1; /* True if NEEDLE is prefix of HAYSTACK. */
+ const unsigned char *hs = (const unsigned char *) haystack;
+ const unsigned char *ne = (const unsigned char *) needle;

/* Handle short needle special cases first. */
- if (needle[0] == '\0')
- return (char *) haystack;
- if (needle[1] == '\0')
- return strchr (haystack, needle[0]);
- if (needle[2] == '\0')
- return strstr2 (haystack, needle);
- if (needle[3] == '\0')
- return strstr3 (haystack, needle);
- if (needle[4] == '\0')
- return strstr4 (haystack, needle);
-
- /* Determine length of NEEDLE, and in the process, make sure
- HAYSTACK is at least as long (no point processing all of a long
- NEEDLE if HAYSTACK is too short). */
- while (*haystack && *needle)
- ok &= *haystack++ == *needle++;
- if (*needle)
+ if (ne[0] == '\0')
+ return (char *) hs;
+ hs = strchr (hs, ne[0]);
+ if (hs == NULL || ne[1] == '\0')
+ return (char *) hs;
+ if (ne[2] == '\0')
+ return strstr2 (hs, ne);
+ if (ne[3] == '\0')
+ return strstr3 (hs, ne);
+ if (ne[4] == '\0')
+ return strstr4 (hs, ne);
+
+ size_t ne_len = strlen (ne);
+ size_t hs_len = strlen (hs);
+
+ /* Ensure haystack length is >= needle length. */
+ if (hs_len < ne_len)
return NULL;
- if (ok)
- return (char *) searchee;
-
- /* Reduce the size of haystack using strchr, since it has a smaller
- linear coefficient than the Two-Way algorithm. */
- needle_len = needle - lookfor;
- haystack = strchr (searchee + 1, *lookfor);
- if (!haystack || needle_len == 1)
- return (char *) haystack;
- haystack_len = (haystack > searchee + needle_len ? 1
- : needle_len + searchee - haystack);
-
- /* Perform the search. */
- if (needle_len < LONG_NEEDLE_THRESHOLD)
- return two_way_short_needle ((const unsigned char *) haystack,
- haystack_len,
- (const unsigned char *) lookfor, needle_len);
- return two_way_long_needle ((const unsigned char *) haystack, haystack_len,
- (const unsigned char *) lookfor, needle_len);
-#endif /* compilation for speed */
+ /* Check for a match at offset zero, avoiding preprocessing overheads. */
+ if (memcmp (hs, ne, ne_len) == 0)
+ return (char*) hs;
+
+ /* Use the Quick-Search algorithm for needle lengths less than 255. */
+ if (__builtin_expect (ne_len < 255, 1))
+ {
+ uint8_t shift[256];
+ const unsigned char *end = hs + hs_len - ne_len;
+
+ memset (shift, ne_len + 1, sizeof (shift));
+ for (int i = 0; i < ne_len; i++)
+ shift[ne[i]] = ne_len - i;
+
+ for (hs += shift[hs[ne_len]]; hs <= end; hs += shift[hs[ne_len]])
+ if (memcmp (hs, ne, ne_len) == 0)
+ return (char*) hs;
+ return NULL;
+ }
+
+ /* Use Two-Way algorithm for very long needles. */
+ return two_way_long_needle (hs, hs_len, ne, ne_len);
}
+#endif /* compilation for speed */
Craig Howland
2018-10-01 22:37:11 UTC
Permalink
Post by Wilco Dijkstra
This patch significantly improves performance of strstr by using Sunday's
Quick-Search algorithm. Due to its simplicity it has the best average
performance of string matching algorithms on almost all inputs. It uses a
bad-character shift table to skip past mismatches.
...
---
diff --git a/newlib/libc/string/strstr.c b/newlib/libc/string/strstr.c
index e72b4bd9125f928486f52bb3ebd199eacef7cfaf..ccbcc50a1b034d36200b9b4b17e8c4f62fcb7fc0 100644
--- a/newlib/libc/string/strstr.c
+++ b/newlib/libc/string/strstr.c
@@ -1,169 +1,154 @@
-/*
-FUNCTION
- <<strstr>>---find string segment
-
-INDEX
- strstr
-
-SYNOPSIS
- #include <string.h>
- char *strstr(const char *<[s1]>, const char *<[s2]>);
-
-DESCRIPTION
- Locates the first occurrence in the string pointed to by <[s1]> of
- the sequence of characters in the string pointed to by <[s2]>
- (excluding the terminating null character).
-
-RETURNS
- Returns a pointer to the located string segment, or a null
- pointer if the string <[s2]> is not found. If <[s2]> points to
- a string with zero length, <[s1]> is returned.
-
-PORTABILITY
-<<strstr>> is ANSI C.
-
-<<strstr>> requires no supporting OS subroutines.
-
-QUICKREF
- strstr ansi pure
-*/
Did you really intend to delete the documentation information? (Seems like it
must be by accident.)
Craig
Wilco Dijkstra
2018-10-02 12:40:11 UTC
Permalink
Hi Craig,
Did you really intend to delete the documentation information? (Seems like it must be by accident.)
Well I rewrote all of the file and keeping an old comment didn't seem
appropriate. I could easily add it back in if it is still useful.

Wilco
Craig Howland
2018-10-02 15:32:39 UTC
Permalink
Post by Wilco Dijkstra
Hi Craig,
Did you really intend to delete the documentation information? (Seems like it must be by accident.)
Well I rewrote all of the file and keeping an old comment didn't seem
appropriate. I could easily add it back in if it is still useful.
Wilco
It's not simply a comment, it is used in the generation of documentation (e.g.
make pdf), so, yes, definitely still useful and should/must be kept.  (The
FUNCTION, INDEX, SYNOPSYS, DESCRIPTION, RETURNS, etc., headings are used to
generate so-called chewout files (I have no idea why they are called that),
*.def, which in turn are used to make the various-format (e.g. PDF) man
pages/documents.)
Craig
Wilco Dijkstra
2018-10-03 13:29:58 UTC
Permalink
Post by Craig Howland
It's not simply a comment, it is used in the generation of documentation (e.g.
make pdf), so, yes, definitely still useful and should/must be kept.  (The
FUNCTION, INDEX, SYNOPSYS, DESCRIPTION, RETURNS, etc., headings are used to
generate so-called chewout files (I have no idea why they are called that),
*.def, which in turn are used to make the various-format (e.g. PDF) man
pages/documents.)
Right I didn't realise that - I've added the comment back in the latest version.

Wilco
Brian Inglis
2018-10-04 00:11:11 UTC
Permalink
Post by Craig Howland
Post by Wilco Dijkstra
Post by Craig Howland
Did you really intend to delete the documentation information? (Seems like it
must be by accident.)
Well I rewrote all of the file and keeping an old comment didn't seem
appropriate. I could easily add it back in if it is still useful.
It's not simply a comment, it is used in the generation of documentation (e.g.
make pdf), so, yes, definitely still useful and should/must be kept.  (The
FUNCTION, INDEX, SYNOPSYS, DESCRIPTION, RETURNS, etc., headings are used to
generate so-called chewout files (I have no idea why they are called that),
*.def, which in turn are used to make the various-format (e.g. PDF) man
pages/documents.)
Early src docs:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=bfd/doc/chew.c;hb=HEAD
[in the hopes the ref may help others to remember about these and EL/IX docs]
--
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada

This email may be disturbing to some readers as it contains
too much technical detail. Reader discretion is advised.
Loading...